Avatar for Username

Prohledat stránky podpory

Vyhněte se podvodům. Za účelem poskytnutí podpory vás nikdy nežádáme, abyste zavolali nebo poslali SMS na nějaké telefonní číslo nebo abyste sdělili své osobní údaje. Jakékoliv podezřelé chování nám prosím nahlaste pomocí odkazu „Nahlásit zneužití“.

Zjistit více

Toto vlákno bylo archivováno. Pokud potřebujete pomoci, založte prosím nový dotaz.

Message filters not moving email

  • 4 odpovědi
  • 1 má tento problém
  • 30 zobrazení
  • Poslední odpověď od sfhowes

rcaddy
rcaddy
more options

I use Popfile to classify my email to then be filtered by Message filters in Thunderbird to be moved to various subfolders. I have multiple filters using Popfile and almost all of the messages are filtered correctly. I'm using a property called X-Text-Classification which Popfile inserts into the header as its classification that should be acted upon. See attached example. I have attached 3 screenshots. Filters is of the 2 filters that are being used in this example. The top image is matched to Header1and does not move to the appropriate subfolder. The bottom image is matched to Header2 and does move.

Any thoughts are appreciated.

I use Popfile to classify my email to then be filtered by Message filters in Thunderbird to be moved to various subfolders. I have multiple filters using Popfile and almost all of the messages are filtered correctly. I'm using a property called X-Text-Classification which Popfile inserts into the header as its classification that should be acted upon. See attached example. I have attached 3 screenshots. Filters is of the 2 filters that are being used in this example. The top image is matched to Header1and does not move to the appropriate subfolder. The bottom image is matched to Header2 and does move. Any thoughts are appreciated.
Přiložené obrázky

Všechny odpovědi (4)

sfhowes
sfhowes
  • Top 10 Contributor
more options

I don't see any obvious difference between the two headers that would make one filter work but not the other. The To: header is slightly different, which suggests the filters have been defined for different accounts (filters are account-specific). Open Tools/Message Filters and check that the filters are defined for the correct account and account folder. Otherwise, enable the filter log and see if anything points to a solution.

rcaddy
rcaddy Autor dotazu
more options

Thanks for your suggestion, I'll let you know what I find.

rcaddy
rcaddy Autor dotazu
more options

I see what you are talking about, but if the filter is using X-Text-Classification as my filter key would it matter if the To is different. At a second glance I see a few other things that are slightly different in the headers. Also, I checked a couple of other email headers that are being filtered correctly and their To is also different. Thanks again for your response.

sfhowes
sfhowes
  • Top 10 Contributor
more options

If the filter log doesn't suggest anything amiss, you could examine the msgFilterRules.dat file in a text editor. There is a dat file for each account.